How can I start GPS if I don’t have any manual for it?

Instructions for starting GPS

1- Turn on your Navigon GPS device by pressing and holding the On/Off button for two seconds. A screen will display with the Navigon terms of service. After reading the terms of service press OK button.

2- Now set your preferences on the unit. After agreeing to the terms of service, the Language Selection window will appear. Select your preferred language and press OK.

3- Next the Distance Unit Selection window will be there, choose between "Miles" or "Kilometers. On the Clock Setting window, choose between the 12-hour or 24-hour clock. The will now appear.

4- Set a home address on Main Display window of your device. From the Main Menu, choose "Take Me Home" option. Enter the city, street name and house number of your home address, don't forget to press OK button after each selection. After you have entered the whole address it will be displayed on the screen. Touch the address to highlight it. Press the "Home Address" button to save the address you have just entered as your Home Address. Once the address has been saved as your Home Address, you can navigate to your home from anywhere by selecting the "Take Me Home" from Main Menu.

5- Create a route to a specific address by selecting "New Destination" from the Main Menu. Press "Enter An Address" and enter your desired city or zip code of the address you want to be routed to. Now press OK. The Street Tab will open. Enter the name of the destination street and again press OK. Enter the destination house number and then click "Start Navigation" to begin the route.