If you have always desired to own your very own gaming arcade, you can now fulfill that dream by bidding for a Zelda 25th anniversary arcade machine on eBay. The machine retains its arty feel with the “water droplet” effect on the paint providing a stunning visual treat for gaming enthusiasts. With certain flaws apart, the paint is as finely laid out as can be done without industrial techniques. The finished product has a sleek look to it that is sure to impress even the most veteran of gaming connoisseurs.

Constructed from ½ inch MDF and ¾ inch plywood, its dimensions are nothing less than impressive. The pin control panel adds glamor to the exciting machine and lends it a touch of elegance and class. The arcade features a 15-inches LED screen. The aspect ratio of the picture can also be changed and, like the most advanced of television models, even zooming is an option with this glitzy monitor. The TVs speakers belt out 8-bit sounds and thus there need be no anxiety regarding the sound system and acoustics of the machine. The console even boasts of a plexi glass bezel framed by a white border over the TV screen. Depending on personal taste and fancies, you can choose an aspect ratio of 4:3, reminiscent of the gaming days of yore, or you could switch to a 16:9 aspect ratio which works equally well on the original Zelda.
As far as the console’s power systems are concerned, there is one power plug at the rear end of the arcade which works exactly like a PC power plug. The toggle switch is fused to safeguard the elements of the machine. The PCB is new from Retro System controller, and the arcade buttons as well as the joystick are shining new as well. Moreover, you will have no worries about a stiff neck from an overdose of gaming as the monitor can be adjusted to about 25 to 30 degrees, which is the apt viewing angle.
The machine is a Retro Entertainment System NES inspired one. The power and reset buttons have been encompassed within the arcade machine itself. The machine harks back to the age of retro and bling with the display case being flocked with bright green flocking. If you are a Zelda figurines aficionado, they can be displayed in their full glory against the green flocking. The heat from the cabinet is dispersed by means of an 80 mm fan. The molex connector can be used to remove and attach it as you prefer. The control panel utilizes two push latches which can be removed in case of servicing or replacement of the buttons.
Via: eBay