Vince Veneziani recently modded a cheap $6 Walgreens sunglasses to look like the pair that Leo wore in The Terminator. All you need to build your own is get a pair of cheap sunglasses, two red LEDs, two 100 Ohm resistors, solder and soldering iron, You could always use a watch battery and some hookup wires of two different colors, about 6 inches each. Now you can go ahead and wrap the resistors between the lenses so that the LEDs are held in place. It is in your hands to bend the LED good enough to make it look like the one from The Terminator. Do a little bit of soldering to connect the LEDs and the battery. If you are in the mood, you could let the LED switch on and off to make you look uber-cool. These fun DIY sunglasses are not only easy to build, but also cool and funky. For the entire step by step guideline check here.

296017